Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> New hanna hi 93114 turbidity and chlorine meter tester
New hanna hi 93114 turbidity and chlorine meter tester
The rugged HI 93114 will log data for up to 25 measurements along with time and date information for retrieval at a later date. This instrument also offers Good Laboratory Practice (GLP) features which allow the user to verify the calibration status of the meter.
With HI 93114 measurements can be performed using either concentration or relative absorbance of the sample depending on the requirements of the application.
HI 93114 can be calibrated using the factory preprogrammed calibration points or can be custom calibrated when in colorimetric mode.
This rugged instrument has been engineered to offer all the sophistication and reliability of bench top laboratory instrumentation in the size of a hand-held meter.
0.5 FTU or 5% of reading (whichever is greater)
0.03 mg/L or 3% of reading (whichever is greater)
2 points, selectable between 0.00 - 50.0 FTU
(0.00 and 20.0 FTU recommended)
4 x 1.5V AA / approx. 60 hours of continuous use or 1000 measurements;
automatic shut-off after 10, 20, 30, 40, 50 or 60 minutes
220 x 82 x 66 mm (8.7 x 3.2 x 2.6")
AMCO-AEPA-1 Calibration Solution at 0 NTU
AMCO-AEPA-1 Calibration Solution at 20 NTU
Glass Cuvet for HI 937xx & HI 832xx Series Meters
Maintenance Kit for HI 93102 & HI 93114
Chlorine, free, DPD Method (100 Tests)
Chlorine, free, DPD Method (300 Tests)
Chlorine, Total, DPD Method (100 Tests)
Chlorine, Total, DPD Method (300 Tests)
HI 93114 is supplied with glass cuvet, batteries and instructions.
