Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> Motors and tools
> Miller millermatic 140 mig w/as/cart/spl-gun 907335011
Miller millermatic 140 mig w/as/cart/spl-gun 907335011
MILLER MILLERMATIC 140 MIG w/AS/CART/SPOOLMATE 100 907335011
POWER SOURCE WITH AUTO SET, ECONOMY CART, 6 FT POWER CORD AND PLUG, 10 FT M-10 MIG GUN AND CABLE ASSEMBLY, 10 FT WORK CABLE AND CLAMP (GROUND), SMITH ARGON AND ARGON/CO2 REGULATOR/FLOWMETER GAUGE WITH HOSE, SPOOL OF HOBART .024 SOLID WIRE, TWO .024 AND TWO .030 CONTACT TIPS, DUAL GROOVE QUICK-CHANGE DRIVE ROLL FOR .024 AND .030/.035 WIRE, FACTORY INSTALLED GAS SOLENOID VALVE, SET-UP AND OPERATION VIDEO AND MATERIAL, INFORMATION/SETTINGS CHART, THICKNESS GAUGE AND SPOOLMATE 100 SPOOLGUN.
Millermatic 140 with Auto-Set &
Spoolmate 100 Series Spool Gun
* The easiest, most affordable all-in-one MIG to setup and start welding
* 115 VAC, 90 A at 20% duty cycle
* Spool gun INCLUDED - welds aluminum from 18 gauge to 14 gauge
NEW! Smooth start patent pending technology provides a smooth, spatter-free start. It's the best-starting machine in the small mig machine catagory. No pop gun starts and no spatter to clean up.
Miller's exclusive "tip saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal componenets from damage. Trigger reset permits quick reset at torch rather than unit.
Easy access to output studs provides convienient polarity changerover when changing from solid or flux core wires.
Thermal ocerload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
202926 .030/.035/.045 DR ROLLFOR FLUX CORE WIRE
