Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> Machine Parts
> Remove
> Used
> DDC316, 16 ch, current-input, 16-bit, a/d converter adc
DDC316, 16 ch, current-input, 16-bit, a/d converter adc
DDC316CGXGT, 16 Channel, Current-Input 16-Bit Analog-to-Digital Converter (ADC), 64 pin BGA, Burr Brown/Texas Instruments.
The DDC316 is a 16-bit, 16-channel, current-input analog-to-digital converter (ADC). It combines both current-to-voltage and analog-to-digital (A/D) conversion so that 16 separate low-level current output devices (such as photodiodes) can be directly connected to its inputs and digitized.
For each of the 16 inputs, the DDC316 provides a dual-switched integrator front-end. This configuration allows for continuous current integration: while one integrator is being digitized by the on-chip ADC, the other is integrating the input current. Adjustable integration times range from 10 s to 1ms.
The DDC316 provides a serial interface of the output data, either multiplexed onto a single data output pin or parallel on four output pins. The output mode can be selected based on the available integration time.
The DDC316 uses a +5V analog supply and a +3.3V digital supply.
* SINGLE-CHIP SOLUTION TO MEASURE 16 LOW-LEVEL CURRENTS
* INTEGRATING I-TO-V CONVERSION FRONT-END
* PROGRAMMABLE FULL-SCALE : 3pC to 12pC
* Data Rate Up To 100kSPS
* Integration Time Down To 10 s
