Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> Industrial Parts
> Replace
> Used
> Megger S1-552 high current insulation resistance tester
Megger S1-552 high current insulation resistance tester
UNIT IS IN GOOD BUT USED CONDITION AND INCLUDES ALL PICTURED ITEMS.
BELOW IS THE DESCRIPTION OF A NEW UNIT:
AVO/Megger S1-522 5kV Insulation Tester
High current insulation resistance tester 5kV
Megger S1-522 5kV Insulation Tester Features
High output current 5mA for fast charging of capacitive loads.
Digital/Analog backlit display.
Variable test voltage from 50V to 5,000V.
Automatic IR, PI, DAR, SV and DD tests.
RS-232 and USB download of results.
Megger S1-522 5kV Insulation Tester Specifications
85V to 265V rms, 50/60Hz, 60VA
6 hours continuous testing at 5kV
50V to 1kV in 10V steps. 1kV to 5kV in 25V steps
2% error guarding 500k leakage with 100M load
Digital display (3-digits) 10k to 15 T
<1.5 seconds per F at 5mA to 5000V
<120ms per F to discharge from 5000V to 50V
Capacitance Measurement (above 500V)
10nF to 50 F (depending on measurement voltage)
Capacitance Measurement Accuracy
Voltage Output Accuracy (0 C to 30 C)
+4%, -0% 10V of nominal test voltage at 1 G load
Current Measurement Accuracy (23 C)
1 mA rms per 250V test voltage up to a maximum of 2mA
Up to 99 minutes and 59 seconds from start of test
15 second minimum setting for test voltage 1000V
30 second minimum setting for test voltage <1000V
Voltage, test time, leakage current, PI, DAR, DD, capacitance and time constant
Serial, once per second of test voltage, current and resistance
Ingress Protection (lid closed)
90% R.H. non-condensing at 40 C
Meets the requirements of EN61010-1-2001 CAT III 300V
Meets the requirements of EN61326-1:1998 for use in heavy industrial areas
305mm (D) x 194mm (H) x 360mm (W)
12.7" (D) x 7.6" (H) x 14.2" (W)
