Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> Industrial Parts
> Add
> Used
> Eagle group 414-24-3-24| 3 comp sink double
Eagle group 414-24-3-24| 3 comp sink double
Eagle Group 414-24-3-24| 3 Comp Sink Double Drainboards
EAGLE Galvanized S/S Three Compartment Sink With Backsplash & Double Drainboards - 24"
Design and Construction Features:
All bowls have deep-drawn one-piece seamless construction using state-of-the-art hydraulic presses.
Drainboards, when provided, are integrally welded.
All sink bowls have a generous radius with a minimum dimension of 3 (76mm) and are rectangular for
Leg locations are adjacent to sink bowls, providing increased stability and maximum weight support
Leg gussets welded to a die-cut heavy-gauge reinforcing plate.
Entire assembly is fuse-welded and planished providing a one-piece seamless sink unit.
10 (248mm)-high full length standard backsplash features 1 (25mm) upturn and tile edge for easy
installation and feathering to wall/splash surface.
14 (356mm) water level 17 (432mm) flood level.
Faucet holes are 11 8 (29mm) punched on 8 (203mm) centers; two sets of faucet holes are
punched where indicated on schedule.
Basket-type waste drains included fit sink bowls
31 2 (89mm) opening and feature 11 2 (38mm) outlet.
14 (356mm) water level is standard.
Heavy gauge stainless steel construction bowls are type 304; drainboards and
Deep-drawn seamless coved corner bowls.
Legs welded adjacent to sink bowls for maximum weight support and stability.
10 (254mm) standard backsplash includes 1 (25mm) upturn and tile edge for easy
Adjustable non-corrosive bullet feet.
Die-stamped creased drainboards for positive drainage.
All EAGLE sinks bearing the NSF Certification Mark are built in compliance with the National Sanitation
Sink Bowl Heavy gauge type 304 stainless steel.
Top Drainboards, backsplash and rolled rims are heavy gauge type 430 stainless steel.
Legs 15 8 (41mm)-diameter heavy-gauge galvanized tubing with plated 12-gauge
gussets and high-impact corrosion resistant fully adjustable bullet feet
crossbracing is 1 (25mm)-diameter heavy-gauge galvanized tubing.
31" x 126" (787 X 3200mm) width/length
24" X 24" (610 x 610mm) Bowl Size
Sink, Three Compartment, 24" front-to-back x 24"w x 14"D drawn bowls, 10" backsplash & 24" double drainboards, galv open frame base w/ side crossrails
Eagle Group T&S Faucet Splash Mounted |313293
T&S Faucet, splash-mounted, 8" centers, 12" swing spout, extra heavy duty (EAG-313293)
Eagle Group Faucet Splash Mount 8in |313918
Faucet, 8" centers, splash mount, 8" spout (EAG-313918)
Eagle Group Faucet Splash Mount |313919
Faucet, 8" centers, splash mount, 16" spout (NOT available on 1-compt. sinks up to 22" long) (EAG-313919)
Eagle Group T&S Faucet Splash Mount |313920
T&S Faucet, splash mount, 8" centers, 8" swing spout, extra-heavy duty (EAG-313920)
Eagle Group Faucet Splash-Mounted Mixing 12in |300716
Faucet, 12"L, splash-mounted mixing faucet, 8" centers, swing nozzle (EAG-300716)
Eagle Group 300804| Splash Mounted Mixing Faucet| 14in
Faucet, 14"L, splash-mounted mixing faucet, 8" centers, swing nozzle (EAG-300804)
Eagle Group Faucet Splash Mount Gooseneck |313075
Faucet, splash mount, 8" O.C., gooseneck (EAG-313075)
Eagle Group 301001| S/S Splash-Mounted Mixing Faucet| 12in
Faucet, 12"L, splash-mounted mixing faucet, 8" centers, swing nozzle, heavy duty (EAG-301001)
Eagle Group 301002| S/S Splash-Mounted Mixing Faucet| 14in
Faucet, 14"L, splash-mounted mixing faucet, 8" centers, swing nozzle, heavy duty (EAG-301002)
Eagle Group 301003| S/S Splash-Mounted Mixing Faucet| 19in
Faucet, 19"L, splash-mounted mixing faucet, 8" centers, double-joint nozzle (NOT available on 1-compt. sinks up to 22" long) (EAG-301003)
Eagle Group T&S Faucet Splash Mounted |313294
T&S Faucet, splash-mounted, 8" centers, 14" swing spout, extra heavy duty (EAG-313294)
Eagle Group Lever Handle Drain |300720
Lever Handle Drain, 1-1/2" IPS connection (EAG-300720)
Eagle Group Lever Handle Drain |300721
Lever Handle Drain, 2" IPS connection (EAG-300721)
Eagle Group Lever Handle Drain w/ Overflow |300722
Lever Handle Drain, w/overflow, 2" IPS connection (EAG-300722)
