Wisconsin Parts Database Instructions and Discussion Team/Group   >   WISCONSIN   >   Industrial Parts   >   Add   >   New   >   Without Warranty   >   New 2 swagelok pb-8-bk 1/2" braided hose + ss couplings

New 2 swagelok pb-8-bk 1/2" braided hose + ss couplings


2 NEW Swagelok PB-8-BK 1/2" Braided Hose + SS Couplings
This is a NEW Heavy Duty Hose Assembly consisting of TWO 65ft Swagelok 1/2" hose and two (each) stainless steel fittings (listed below). The textile braid-reinforced synthetic rubber tubing is insulated in foam which is then wrapped in a braided-plastic sheathing. Each of the assemblies is then tie wrapped to the other (as can be seen in the photos).
Both ends of each hose are equipped with Swagelok fittings. We were able to determine specifications on two of the Swagelok fittings - their part numbers are SS-QC8-S-810 and SS-QC8-B-810. There is no part number evident on the other connectors. All four of the connectors are removable.T he hose and fittings you receive will still be sealed in a protective plastic bag. Only what is shown in the photos is included.
(2) NEW 65 ft. Swagelok Push On Heavy Duty Hose, # PB-8-BK
* Cover is flame-resistant in accordance with 30CFR, Part 18.
* Single-braid rayon fiber reinforcement is woven for maximum strength and end connection retention.
* End connections are reusable.
* Assembly does not require clamps or special tools.
* Nominal Hose Size in. (mm) 1/2 (12.7)
* Minimum Bend Radius in. (cm) 5.00 (12.7)
* Temperature Range F ( C) 40 to 200 ( 40 to 93)
* Working Pressure at 70 F (20 C) psig (bar) 300 (20.6)
* Minimum Burst Pressure at 70 F (20 C) psig (bar) 1200 (82.6)
PB-8-BK Pressure-Temperature Ratings*- F ( C)
* 40 ( 40): 300 psig (20.6)
* *Temperature Ratings maintain a minimum factor of 4:1 between working pressure and minimum burst pressure.
(1) New Swagelok SS-QC8-S-810 SS Instrumentation Quick-Connect Stem, 1.5 Cv, 1/2 in. Tube Fitting
(1) New Swagelok SS-QC8-B-810 SS Instrumentation Quick-Connect Body, 1.5 Cv, 1/2 in. Tube Fitting
* Body Material Stainless Steel
* Series Instrumentation Quick-Connect
* End Connection 1 Size 1/2 in
* End Connection 1 Type Swagelok tube
* Flow Coefficient Cv 1.5 - If coupled with a DESO stem, 2.4 - If coupled with a SESO stem,
* Pressure Rating Coupled at Max Temp 250 PSIG @ 400 F /17.2 BAR @ 204 C
* Pressure Rating Coupled at Room Temp 750 PSIG @ 70 F /51.6 BAR @ 21 C
* Pressure/Temp. Rating (Coupling and Uncoupling) 250 PSIG @ 70 F /17.2 BAR @ 21 C
* Pressure Rating UnCoupled at Room Temp 250 PSIG @ 70 F /17.2 BAR @ 21 C
(2) New Swagelok push connect fittings, part number and specs not known.



New 2 swagelok pb-8-bk 1/2