Wisconsin Parts Database Instructions and Discussion Team/Group > OTHER STATES
> Machine Parts
> Add
> New
> With Warranty
> Dura-seal x-terra gloss waterbased floor finish gallon
Dura-seal x-terra gloss waterbased floor finish gallon
Dura Seal X-TERRA is a two-component, urethane/acrylic resin blend formulated specifically for the demands of commercial and high traffic residential hardwood floors. Its unique technology provides a long- wearing, commercial grade finish that is the ultimate in durability.
* Product Use: New Floors, Natural
* Sand and prepare floor according to NOFMA or NWFA recommended methods.
* Finish sanding with a 120 or 150 grit screen. Do not use steel wool.
* Vacuum thoroughly and tack floor with a slightly water-dampened cloth to remove all dust.
* Apply 1 coat of Dura Seal Super Base Sealer
* Apply 2 coats of Dura Seal X-Terra.
* For high traffic commercial applications, a third coat is recommended.
* Product Use: New Floors, Stained
* Finish sanding with a 100 grit screen. Do not use steel wool.
* Apply Dura Seal Penetrating Stain according to label directions.
* Apply 2 coats of Dura Seal X-Terra over thoroughly dried stain.
* Product Use: Previously Finished Floors
* Abrade and Recoat: Be certain floor is free from all wax or oily residue.
* Clean floor thoroughly to remove all contamination.
* Abrade floor with a 120 grit screen. Do not use steel wool.
Note: Do not apply over wax, shellac, lacquer or stains containing wax or stearates.
X-Terra will adhere to most stains and finishes after proper preparation. Always prepare a sample or test area to determine compatibility.
* Recoat time: 2-3 hours between coats
* Light foot traffic is acceptable after 24 hours
* Allow one week before exposing finish to rugs, cleaners, spills or heavy traffic
* Coverage: Approximately 350-400 sq.ft. per gallon
* Clean Up: Application tools should be cleaned with warm water immediately after use.
* Maintenance: Use walk-off mats at all entrance doorways to keep dirt and grit to a minimum. Sweep or vacuum daily and damp wipe as needed with Dura Seal Hardwood Floor Cleaner.
* Storage: Store at room temperature. If stored at high temperature, cool to room temperature before use. Keep from freezing. If frozen, slowly warm to room temperature and mix thoroughly before using.
* Pot Life: The Finish/Hardener mix must be used within 4 hours after it is mixed. Product properties are diminished after 4 hours. The finish and hardener can only be mixed one time.
1) Recoat time: 2-3 hours between coats
2) Wait 24 hours before allowing light traffic
3) Wait one week before replacing rugs and allowing heavy traffic
Approximately 400-500 sq. ft. per gallon
Clean application tools with warm water immediately after use.
Sweep or vacuum regularly to prevent accumulation of abrasive dirt. Do not use all-purpose cleaners. We recommend weekly usage of Dura SeaITM Hardwood Floor Cleaner.
Store at room temperature. Keep from freezing. If frozen, warm to room temperature and mix thoroughly before use.
