Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Motors and tools
> Replace
> Used
> Chroma smart load 6304 mainframe 60W 100W 63006 63010
Chroma smart load 6304 mainframe 60W 100W 63006 63010
Chroma Smart Load 6304 Mainframe 60W 100W 63006 63010
Note: This sale is for the 6304 Mainframe ONLY. The Agilent 3644A power supply is NOT included.
This Smart Electronic Load 6034 Mainframe has 3x Smart Electronic Loads installed (2x of the 63006 loads and 1x of the 63010 loads). There is one 6305A Timing Analyzer unit as well.
The 6034 Mainframe case in in good condition. This unit is rack mountable. The unit has some scratching on all sides of the case, but is still in good shape. This mainframe has two heavy-duty carry handles that support the weight of this fully loaded Electronic Load Mainframe. The power switch on the front of the 6034 clicks on and off smoothly, and functions correctly. The 5 push buttons on the front of the mainframe ( up, down, recall, save, and local ) all work. The two-digit display is crisp and bright. All GPIB, BNC, RS-232, and remote ports are in clean, operable condition.
We tested each load unit with one of our HP E3644A Power Supplies and pictured the results. This unit is in clean, tested and functional condition.
Chroma Model 6300 series Smart Electronic Load System is the state-of-the-art instrument for testing DC power sources and power electronic components. The system is configured by plugging the user electable load modules into the system mainframe, and operated using the instrument front panel keypads or the remote controlled instructions via GPIB interface. The load modules can be programmed independently for testing multi-output DC/DC power supplies, or in parallel for testing high power application.
The 6300 family offers 4 types of modular loads with power ranging from 60 watts to 300 watts, current setting from 150 A to 60A, and voltage measurement from 0.5mV to 250V. Each load is isolated and floating, programmable in dual current ranges and measuring voltage ranges, and capable of synchronizing interface for master/slave control operation. The load can be operated in constant current, constant resistance,constant voltage, or constant power mode.
The 6300 can simulate a wide range of dynamic loading applications. The loading waveform is user programmable in slew rates, load levels, duration, and conducting voltage. The load can also be controlled via external analog control voltage, or signal generator to simulate specific application requirements. Furthermore, up to 100 sets of system operating status can be stored in battery backup SRAM and recalled instantly for automated testing application.
Real time measurement of voltage, current, and power is integrated in each 6300 load module using 15-bits precision measurement circuit. The user can perform on line voltage measurement and adjustment, or simulate short circuit test using simple front panel keypad operation. Additionally, the load module offers optional noise measurement function capable of detecting 20MHz noise via differential mode input without the need of a scope.
The 6300 has self diagnosis routine to maintain instrument performance at all time. It is also protected against OPP, OCP, OVP, OTP, and reverse polarity to guarantee quality and reliability for even the most demanding engineering testing and ATE applications.
* Plug-in electronic load modules in selectable mainframes
* Parallel load modules up to 2400W for high current and power application
* Master/Slave interface for synchronizing multiple loads
* GPIB/RS-232 Interface
* CC, CR, CV, and CP operation modes
* Precision loading delivers 150 A resolution
* Minimize input resistance allowing load to sink high current at low voltage
* Dynamic loading with speed up to 20KHz
* Real time load simulation and output measurement
* Store up to 100 sets of front panel input Status for instant recall
* 15 bits precision voltage and current measurement with multi-range selection
* Remote sensing capability
* 20MHz differential mode noise measurement
* Short circuit test & short current measurement
