Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Motors and tools
> Remove
> New
> Without Warranty
> New brand medical infusion pump lcd display for icu
New brand medical infusion pump lcd display for icu
Brand New Medical Infusion Pump LCD Display
It will give audible and visible alarm and then switch to KVO mode after finish infusing the preset volume
The pump has OCCLUSION, AIR IN LINE, DOOR OPEN, FINISH, LOW BATT, INTERRUPTION, ABNORMAL and DELAY OPERATION alarm functions
when the pump stops, purge function is ended to purge air out of line. Double click bolus button to purge. Contrarily, it infuses fast
Set the flow rate between: Drop/min, ml/h and time infusion volume
when power on, the pump executes a self-check. LCD display and all lamps will be lightening if it works normally.
The corresponding lamp will be off if any part doesn t work
Accumulated volume display and clear
Memory can keep the parameters which you set up last time over 8 years
In order to make infusion accurate, calibrate the infusion set according to actual situation
IP-50B-5gif.jpg picture by chinamedshop
IP-50B-2gif.jpg picture by chinamedshop
IP-50B-4gif.jpg picture by chinamedshop
IP-50B-3gif.jpg picture by chinamedshop
More than 1000ml/h, 1ml/h step
Less than 1000ml/h, 0.1ml/h step
Optional choose from higher to lower
More than 3 hours continuously at 30ml/h with fully charged battery
Circumstance Temperature: 10 ~40
infusion precision will decrease when temperature 18
Atmospheric Pressure: 86~106KPa
Fit for mainline, small volume infusion, quick infusion
Any questions please contact Summer at ****@gmail.com Welcome :)
