Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Industrial Parts
> Remove
> Powerboss tennant ford 1.3L 4CYL *lp*industrial engine
Powerboss tennant ford 1.3L 4CYL *lp*industrial engine
FORD 1.3L IN LINE 4 CYLINDER INDUSTRIAL ENGINE. THIS IS A 53HP LIQUID PROPANE ENGINE. THIS HAD THE LONGBLOCK REPLACED JUST A FEW MONTHS AGO.
NEW PARTS IN MAY WERE COMPLETE LONG BLOCK INCLUDING HEAD AND WATER PUMP. ALSO REPLACED WERE THE COOLING FAN, DIS IGNITION, WIRES, PLUGS, ALTERNATOR AND OIL PRESSURE SENDER. USED PARTS WITH ENGINE ARE THE INTAKE AND EXHAUST MANIFOLDS, STARTER, IMPCO L/P CARB, HOOF GOVERNOR, AIR FILTER ASSY, L/P LOCK OFF, L/P REGULATOR, AND ALL SENSORS. ALSO INCLUDED WITH THIS ENGINE ARE FLYWHEEL WITH SPLINED PUMP ADAPTER, BELLHOUSING, AND MOTOR MOUNTS.
THIS HAS SOME SURFACE RUST FROM THE MACHINE BEING PARKED OUTSIDE FOR STORAGE.
THIS IS A PLUG AND GO SETUP. WE DROVE THIS MACHINE INTO THE SHOP AND PULLED THE ENGINE. YOU WOULD ONLY NEED A THROTTLE CABLE SETUP AND WIRING TO MAKE THIS RUN.
THESE ARE STRONG RUNNING ENGINES WITH A HUNDRED DIFFERENT APPLICATIONS FROM FLOOR SWEEPERS AND SCRUBBERS, TO GENERATORS, TO ANYTHING YOU WOULD NEED WITH THIS TYPE OF POWER. THE BENEFIT OF THIS ENGINE RUNNING ON LIQUID PROPANE IS YOU CAN USE IN AN INDOOR APPLICATION.
THIS ENGINE WILL ALSO RUN ON STANDARD GASOLINE, ALL YOU WOULD NEED TO DO IS CHANGE THE CARB SETUP, AND PULL OFF THE LP GEAR.
