Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Electrical Components
> Remove
> New
> Without Warranty
> 8" swg 19" cc tschudin htg-410 od grinder, hyd. tbl, au
8" swg 19" cc tschudin htg-410 od grinder, hyd. tbl, au
8" Swg 19" cc Tschudin HTG-410 OD GRINDER, HYD. Tbl, AU
8" Swing 19" Centers Tschudin HTG-410 OD GRINDER, HYD. TABLE, AUTO INFEED, PLUNGE, RAPID,SPKT TIMER
8" X 19" TSCHUDIN "SWISS" SUPER-PRECISION
SWING OVER TABLE ................................. 8"
DISTANCE BETWEEN CENTERS ........................ 19"
TABLE SPEED ........................... 0 TO 195" IPM
SWIVELLING RANGE ...................... +/- 9 DEGREES
WHEEL SIZE ................... 14"DIA. X 2"W X 5"BORE
SWIVELLING RANGE ...................... +/- 5 DEGREES
MOTOR .......................................... 4 HP
TRAVEL BY USING THE HANDWHEEL .................. 1.8"
RAPID APPROACH, AUTOMATICALLY ................ 1-1/2"
INFEED-AUTOMATIC ................. 0 TO .050" ON DIA.
INFEED SPEED, MAXIMUM ..................... 1.2"/MIN.
SPARKOUT ............................ 2 TO 30 SECONDS
SPINDLE TAPER .................................. #5MT
SPINDLE NOSE ................................ M48 X 3
SWIVELLING RANGE ........................ 360 DEGREES
INFINITELY VARIABLE SPINDLE SPEED ..... 65 TO 500 RPM
TAPER OF CENTER BORE ........................... #3MT
TRAVEL OF CENTER ............................... 0.8"
APPROXIMATE MACHINE DIMENSIONS FOR
OPERATION .......................... 8'L X 6'D X 80"H
APPROXIMATE WEIGHT .......................... 4,400 LBS
TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO
STEEL BEARING WHEELHEAD DESIGN
SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS
FOR TRAVERSE & PLUNGE GRINDING CYCLES
-DUAL RATE INFEED .... THIS IS AN OPTION, AND THIS
-RAPID WHEELHEAD ADVANCE AND RETRACTION
SWING DOWN I.D. GRINDING ATTACHMENT WITH I.D. SPINDLE
DIAL INDICATOR FOR TABLE TAPER ADJUSTMENT
SWING BACK DIAMOND WHEEL DRESSER WITH MICROMETER ADJUSTMENT
5" 4-JAW CHUCK, PLAIN BACK, CURRENTLY MOUNTED ON THE
MACHINE IS WIRED FOR 3/60/575 .... MACHINE WAS PURCHASED
FROM A COMPANY IN CANADA. A TRANSFORMER CAN BE PROVIDED
FOR $600 TO ALLOW THIS MACHINE TO BE USED AT
200-208-220-230-240-440-460-480 VOLTS.
PLEASE SPECIFY YOUR EXACT VOLTAGE REQUIREMENT.
** BEAUTIFUL CONDITION & APPEARANCE, JUST A LOVELY "SWISS"
Click Here For More Tschudin Machines
