Wisconsin Parts Database Instructions and Discussion Team/Group   >   INDIANA   >   Electrical Components   >   Remove   >   New   >   Valby ch 150 6-inch wood chipper, low hours, ohio

Valby ch 150 6-inch wood chipper, low hours, ohio


This chipper will run with a 30 hp tractor, but work much better with a 40 to 50 hp tractor. It will reduce a 12-foot hardwood log into chips in under 30 seconds with 50 hp behind it, with almost no effort by the operator. It DOES NOT have a power feed, but it does pull logs in by itself. I ran it alone, clearing a building site, and crated a pile of chips, suitable for bio-fuel or mulch, the size of a Chevy Impala in 4 days.
Here is link to a used CH 150 with a power feed for $4200:
http:// /listingsdetail/detail.aspx?ohid=6974407
http:// /ch140.htm
Here is a link to a vendor of new Valby chippers with data on the CH150:
http:// /newpage28.htm
Here is a link for the PTO shaft for use with the CH 150 chipper. The M4-31 has to be cut shorter by about 4 inches to work with the chipper.
http:// /newpage17.htm
Key words: asplundh, morbark, vermeer, bandit, rayco, jinma, wallenstein,



Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio Valby ch 150 6-inch wood chipper, low hours, ohio