Wisconsin Parts Database Instructions and Discussion Team/Group > ILLINOIS
> Motors and tools
> Remove
> Tektronix THS720A 100MHZ scopemeter digital 500 ms/s
Tektronix THS720A 100MHZ scopemeter digital 500 ms/s
Tektronix THS720A 100MHz Scopemeter
The THS720A TekScope instrument combines a two-channel oscilloscope and a digital multimeter (DMM) in a rugged, handheld package.
LIKE NEW CONDITION. I purchased new for about $3,000, used this for one week, and then packed it away. I havnt used it since, so Im selling it. I did verify that this unit is fully functional and is in excellent working condition. No scratches, blemishes - looks and works like new.
Battery is ok, it holds charge. The unit will run off the DC powercord included regardless of battery. If you would like to purchase a new battery go to Newark Electronics. Part # THS7BAT.
* Tektronix TekScope THS720A 100MHz Ocilliscope - Digital Realtime 500MS/s
* Mueller Hard Point Test Leads (1 Red - 1 Black)
* (2) Tektronic Hook Clips (Black)
* Alligator Clips (1 Red - 1 Black)
* Extended Hook Clips (1 Red - 1 Black)
* Battery power or external power
* High-resolution, high-contrast display with temperature compensation for clear visibility over a wide temperature range
* Onboard waveform, data, and setup storage
* Fully programmable through the RS-232 communication port
* 500 MS/s Sampling Rates per Channel
* Two Channels and Dual Digitizers
* 33/4 Digit DMM with Datalogger
* Extra Bright Backlit Display
* Independently Floating Isolated Oscilloscope and DMM Channels for Safety
* Full Floating Measurement Capability up to 600 VRMS
* Advanced Trigger Delay, Pulse and Video (Line Count and Field Select)
* RS-232 Programmability/ Communications
* NiCd Battery and AC Adapter
* Field or Bench Electronic Troubleshooting
* Floating (Nongrounded) System Measurements
* Sample Rate (each channel): 500 MS/s
* Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
* Vertical Resolution: 8-Bits.
* Record Length: 2500 points.
* Horizontal Accuracy: 200 ppm.
* Autorange: User-selectable.
* Trigger Modes: Auto, Normal.
* Trigger Types: Edge, Pulse, Video, External.
* Video Trigger Formats and Field Rates: Odd field, even field and line.
* External Trigger Input: 5 MHz TTL compatible.
* Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
* Waveform Storage: 10 waveforms.
* Acquisition Modes: Sample, Envelope, Average, Peak Detect.
* Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
* Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
* Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.
* DC Voltage Ranges: 400.0 mV to 880 V.
* DC Volts Accuracy: (0.5% of reading + 5 counts).
* True RMS AC Voltage Ranges: 400.0 mV to 640 V.
* Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
* Resolution: 4000 count, 3-3/4 digits.
* AC Volts Accuracy: (2% of reading + 5 counts).
* Resistance Ranges: 400.0 O to 40.00 MO.
* Resistance Accuracy: (0.5% of reading + 2 counts); 40 MO: (2% of reading + 5 counts).
* Diode Test Range: 0 to 2 V.
* Continuity Check: Audible tone when < 50 O.
* Modes: Min, Max, ?, Max-Min, Avg, Hold.
* Nonvolatile Storage: 10 DMM screenshots.
* Vertical Zoom Capability: 2X, 5X, 10X.
* dB Scale: Selectable, referenced from 1 mV to 10 V.
* dBm Scale: Selectable, referenced from 50 O to 600 O.
* Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
* EMC: Meets Directive 89/336/EEC.
* Power: NiCd rechargeable battery pack with AC adapter (both included).
* Battery Life: Approx. 2 hours from full charge.
* Display Resolution: 320 x 240.
The Tektronix THS720A service manual can be found at this link...
http://www2.tek.com/cmswpt/madetails.lotr?ct=MA&cs=msv&ci=9985&lc=EN
Battery works well. Ran additional test today on a fully charged battery. It still was measuring after 1:40 hrs of running in DMM mode. I didnt run the unit down to the end of charge, but this is consistant with the original specification on the unit.
