Wisconsin Parts Database Instructions and Discussion Team/Group > ILLINOIS
> Machine Parts
> Replace
> Used
> With Warranty
> Olympus microscope CK40 inverted
Olympus microscope CK40 inverted
OLYMPUS CK40 INVERTED MICROSCOPE.
HAS A TRINOCULAR HEAD AND NO EYEPIECES.
MODIFIED FOR AN UNKNOWN APPLICATION.
THERE ARE THREE OBJECTIVES ON THE FOUR POSITION OBJECTIVE TURRET. TWO OF THEM ARE 10X AND ONE IS A 20X. THEY ARE NOT OLYMPUS OBJECTIVES BUT ARE IN GOOD TO VERY GOOD CONDITION. THEY ARE THE 160MM TUBELENGTH TYPE AND HAVE STANDARD RMS THREADS. THE FOURTH POSITION IS CAPPED WITH A DUST CAP.
THE LENSES AND PRISMS OF THE CK40 STAND ARE CLEAR AND CLEAN. NO CLOUDING, NO FUNGUS, NO DELAMINATION. NO PRISM ALIGNMENT PROBLEMS.
MORE NOTES ON THE OLYMPUS TRINOCULAR HEAD INCLUDED:
USED. CLEAN. VERY GOOD CONDITION.
SLIDING BEAMSPLITTER: SPLIT W/CAMERA OR 100% TO VIEWER
Please note: There is a small area of delamination at the lower end of the sliding prism ... THIS IS NOT VISIBLE WHEN YOU PUT YOUR EYEPIECE OR PHOTO EYEPIECE IN THE TRINOC PORT SO IT WILL NOT BE PICKED UP BY IMAGE CAPTURE. There is NO delamination of any of the other prisms in this trinocular observation tube and the image to the viewer at 100% IS 100% EXCELLENT.
ADD A PAIR OF EYEPIECES 10X WF OLYMPUS IF YOU NEED THEM ( EYEPIECES AVAILABLE AT EXTRA COST )
