Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> Electrical Components
> Remove
> Used
> With Warranty
> Elgo Z54 axis position indicator ** **
Elgo Z54 axis position indicator ** **
Consumption max. 70 mA (without measuring system)
2) Position Indicator Z54.XXX.230 resp. 115
Operating temperature : 0 C + 50 C
Stock temperature : - 40 C + 70 C
Display window : 14 mm high LED red, 5 Decades
PC- Interface : Standard RS-232
SSI Interface* : Standard SSI, as absolute measuring-input
Protection class (front) : IP43 (installed state)
Protection class (rear) : IP00
Analog input * (Option) : 10 Bit A/D Converter, 0... 10 VDC oder 0... 20 mA
Analog output (Option) : 12 Bit D/A Converter, 0 ...10 VDC (Imax = 5 mA)
or 0 (4)... 20 mA Rmax = 200
2 Relay outputs (Option) : potential free shutters 24 VDC / max. 1 A
Max. input current 10 mA PNP (active high), 24 VDC +/- 10 %
24 VDC, max. 75 mA load by encoder or measuring system
Panel version (standard) b x h = 96 x 72 mm (cut out 93 x 67 mm)
Install depth with screw terminals = 78 mm
Install depth with SUB-D connectors = 115 mm
Built on version (Option A): b x h = 107 x 76 mm
Install depth: = 95 mm (160 mm with power-connector)
Mounting holes: 2 x M5 max. 7 mm deep, bore hole distance 60 mm
