Wisconsin Parts Database Instructions and Discussion Team/Group > WISCONSIN
> Electrical Components
> Add
> New
> Without Warranty
> Ridgid 1224 pipe threader threading machine both dies
Ridgid 1224 pipe threader threading machine both dies
Far from like new this threader needs a good Soaping and cleaning. However if you are in the mood to save a few hundred bucks $$$$ you will and you could resell it and make them back.
The bottom box is greasy Need some purple power and elbow grease or a power washer. The rear chuck was replaced so it is new, Both dieheads look great and have good teeth in them.
* Threads 1/4"-2" pipe at 36 RPM and 2-1/2"-4" at 12 RPM
* The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
* An induction motor helps insure sounds levels well within the limits set by the regulating authorities
* A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced
* 1/4"-2" Universal Die Head; 2-1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads
* Constant and proper lubrication of dies and workpiece with through-head oiling
* Approved to UL Standards (NRTLC)
* Pipe Capacity: 1/4" - 4" (6 mm - 100 mm), 4" - 6" (100 mm - 150 mm) with 161 Geared Threader
* Bolt Capacity: 1/4" - 2" (6 mm - 50 mm)
* Motor: 1-1/2 HP, single-phase, 60 Hz or 50 Hz, induction type
* Motor Control: Reverse/off/forward, heavy-duty rotary-type and integral foot switch
* Gear Box: Two-speed gear box 3:1 ratio
* Chuck: Hammer-type with replaceable rocker-action jaw inserts
* Rear Centering Device: Cam-action
* Cutter: Model 764 full-floating, self-centering 1/4 "- 4" with F-229 cutter wheel
* Reamer: Model 774, 1/4" - 4" blade-type
* Pump: Self-priming, gerotor-type, automatic-reversing, constant flow
Model No. 1224 threading machine with foot switch
-(1) No. 714 (914) 2 1/2"-4" receding self-opening die head & dies.
-(1) No. 711 (911) 1/4"-2" universal self-opening die head & 1"-2" dies.