Wisconsin Parts Database Instructions and Discussion Team/Group > OTHER STATES
> Machine Parts
> New cal controls cal 3300 temperature controller
New cal controls cal 3300 temperature controller
CAL 3300 Temperature Controller, new in box, includes 2 Year Factory Warranty. This is a new controller not surplus or used junk. We sell at the low price 24-7.
We are here to help you get it running too.
Standards: IPTS/68/DIN 43710
CJC rejection: 20:1 (0.05 / C) typical
External resistance: 100W maximum
(100W 0 C/138.5W 100 C Pt)
Bulb current: 0.2mA maximum
Applicable to all inputs SM = sensor maximum
Calibration accuracy: 0.25%SM 1 C
Sampling frequency: input 10Hz, CJC 2 sec.
Common mode rejection: Negligible effect up to 140dB, 240V, 50-60Hz
Series mode rejection: 60dB, 50-60Hz
Temperature coefficient: 150ppm/ C SM
Reference conditions: 22 C 2 C, rated voltage after 15
SSd/SSd1/SSd2: solid state relay driver: To switch a
remote SSR 5Vdc +0/-15% 15mA non-isolated
Miniature power relay: form A/SPST contacts (AgCdO) rLY and rLY1: 2A/250ac resistive load
rLY2: 1A/250ac resistive load
Displays: Upper, 4 Digits, high brightness green LED. 10mm (0.4") high.
Lower, 4 Digits, Orange LED. 9mm (0.35") high (9400 only)
Digital range -199 to 9999
Hi-res mode -199.9 to 999.9
LED output indicators - flashing SP1 square, green; SP2 round, red
Keypad: 3 elastomeric buttons
Installation: Categories ll and lll
Protection: NEMA 4X, lP66
EMC emission: EN50081-1 FCC Rules 15 subpart J
Ambient: 0-50 C (32-130 F)
Mouldings: flame retardant polycarbonate
* Full PID autotuning temperature controllers
* Sleeve mounting for easy maintenance
* IP66 protection from front panel
* Charting and logging software option
* RS232/485 Modbus option (Shown in picture above, but not included)
