Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Motors and tools
> Appleton afux conveyor control pull switch - right hand
Appleton afux conveyor control pull switch - right hand
APPLETON : AFUXO333-01 - CONVEYOR CONTROL SWITCH - PULL CORD TYPE - RIGHT HAND
Where alarm or computer interface capabilities are needed.
Used in the control circuit of magnetic motor starters to shut down motor-driven conveyors or other machinery.
warehouses, loading docks and other industrial processes.
AFUX Series is used in Class I and II areas where flammable vapors or highly combustible dusts are present.
Rugged Torsion Spring for positive actuation of Flag Arm.
Stainless steel bushing may be easily reversed to increase or decrease actuation force (15 or 25 lbs.)
Maximum distance between switches should not exceed 200 feet.
Available with two switch types:
A) Two circuit double break switch is rated 15 Amp, 120, 240, 480, 600 VAC, 0.5 HP 120 VAC, 1 HP 240 VAC, 0.8A 115 VDC, 0.4A 230 VDC.
B) Single pole/double throw switch is rated 20 Amp, 125, 250, 480VAC, 10 Amp 125 VAC L tungsten lamp load, 1 HP 125 VAC, 2 HP 250 VAC, 0.5 A 125 VDC, 0.25 A 250 VDC.
Switch temperature range -40 F to 150 F (-40 C to 66 C).
Two 1 conduit openings (top and bottom). Standard Materials
Flag arm is steel with red epoxy paint.
Stainless steel actuator shaft, retaining ring, clevis loop and torsion springs. Standard Finishes
Standard enclosure is peened; epoxy powder coat optional.
UL Listed: Files #E164877, #E10449.
