Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Motors and tools
> Add
> New
> With Warranty
> Roofmate roof insulation panel 1 panel 24" x 48"
Roofmate roof insulation panel 1 panel 24" x 48"
this sale is for 1 panel 24" x 48 "
pieces are tongue and groove, fit together nicely just like a wood floor ...
will give discount for full truck load check out our other listings
STYROFOAM< BRAND INSULATION PRODUCT DATA SHEET GENERAL DESCRIPTION STYROFOAM.. brand insulation is a closed cell, rigid plastic, extruded polystyrene foam insulation. BASIC USE STYROFOAM brand insulation is designed for use in roof, wall and foundation insulation applications in new or retrofit commercial structures. STYROFOAM RoofMate is intended for use on top of roofing/waterproofing membranes in ballasted IRMA/PMR (Inverted Roof Membrane Assembly/Protected Membrane Roof) applications. STYROFOAM PlazaMate and HighLoad 100 are intended for use above roofing/waterproofing membranes in roof, plaza or parking deck applications where high compressive strength is required. SIZES STYROFOAM brand insulation is available in panels 24 inches wide X 96 inches long in thicknesses of 1 inch to 4 inches depending on the product type. TECHNICAL SPECIFICATIONS TEST METHOD ROOFMATE PLAZAMATE HIGH LOAD 100 PROPERTY THERMAL RESISTANCE 5.0 5.0 5.0 Aged R-value/inch @75 F mean. ASTM C518 (0.88) (0.88) (0.88) temp., ft2*hr* F/Btu, (M2*K/w) COMPRESSIVE STRENGTH1 40 60 100 ASTM D1621 psi, (kPa), min. (276) (413) (689) FLEXURAL STRENGTH 60 75 100 ASTM C203 psi, (kPa), min. (413) (517) (689) WATER ABSORPTION ASTM C272 0.1 0.1 0.1 % by volume, max. WATER VAPOR PERMEANCE2 0.3-0.8 0.3-0.8 0.6-1.1 ASTM E96 perm, (ng/(Pa*s*m2)) (17.2-46.0) (17.2-46.0) (34.5-63.2) DIMENSIONAL STABILTY ASTM D2126 2.0 2.0 2.0 % linear change, max. LINEAR COEFFICIENT OF THERMAL EXPANSION -3.5 X 10-5 3.5 X 10-5 3.5 X 10-5 in./in.* F, (mm/mm* C) TYPE ASTM C578 VI VII V MAXIMUM USE TEMPERATURE 165 165 165 - F, ( C) (74) (74) (74) 1. At 10% deformation or yield, whichever occurs first. Since STYROFOAM is a visco-elastic material, adequate design safety factors should be used to prevent long-term creep static loads, 3 to 1; dynamic loads, 5 to 1. 2. Values based on desicant method. Vapor permeance varies with type and thickness. jack davis 503
