Wisconsin Parts Database Instructions and Discussion Team/Group > MICHIGAN
> Electrical Components
> Add
> New
> 2 tap tower kegerator conversion kit keg beer sdtck-5T
2 tap tower kegerator conversion kit keg beer sdtck-5T
Standard 2 Product Tower Kegerator Conversion Kit with 5 lb. Co2 Tank
Enlarge Standard 2 Product Tower Kegerator Conversion Kit with 5 lb. Co2 TankEnlarge Image
The Standard Double Faucet Tower Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator or chest freezer into a two product draft beer cooler. This kegerator kit is designed to run two completely separate kegs. Depending upon your refrigerator capacity, you can run 2 full size kegs, 2 pony kegs, 2 6 gallon kegs or any combination you choose. All the draft beer parts are of the highest commercial grade quality which are designed and built to last.
STANDARD DOUBLE FAUCET TOWER KIT COMPONENTS
2. Commercial Grade Gauge Co2 Regulator with Co2 Splitter: This commercial double gauge regulator is a very high quality regulator at a incredible price. This commercial regulator works with any Co2 Tank with a CGA-320 valve. This Double Gauge regulator measures PSI, as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The large turn handle in the center is used to easily adjust the output pressure. This regulator features a Y splitter and two shut off valves on the house out barbs
4. Two KT85D-L American "D" System Sankey Lever Handle Couplers. This keg tap works with all American "D" system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the kegs.
5. Single Column, Double Faucet 3" Polished Stainless Steel Draft Beer Tower. This is a Polished Stainless Steel Single Column, Double Faucet, 3" Diameter Draft Tower. This tower comes complete with two chrome-plated brass beer faucets with brass levers and two separate 5" lengths of 3/16" clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
6. Two Chrome Plated Faucets with Brass Lever.
7. Two Comes with black ABS plastic Faucet Knobs.
8. 1 Fiber Washer that is placed between regulator and Co2 Tank. This washer is optional. You can pick up additional washers when you get you tank filled.
9. Two Neoprene Washers that are placed between the keg couplers and the beer line assemblies. The purpose of these washers are to stop any beer from leaking out the top of the keg couplers.
10. Deluxe Specialty Faucet Wrench
