Wisconsin Parts Database Instructions and Discussion Team/Group   >   ILLINOIS   >   Industrial Parts   >   Add   >   New   >   Winona van norman 4000 head & block wet surface grinder

Winona van norman 4000 head & block wet surface grinder


The stones are at least 90 to 95% having been changed not long ago. Lots of grinding miles left on the stones in this Winona. The photo shows the amount of stone protruding outward with the stones bottomed in their pockets. The hydraulic shuttle on the table works well with no unusual noises and runs very smoothly. The coolant pump also is in great shape. Sometime back, the original Italian built motor was replaced with a Lincoln Electric which you see mounted on top. This motor powers the machine very well and is equally reliable. It is connected to the old motor shaft through a lovejoy coupling and mounted directly over the old motor. You could install a frequency drive on the head motor and that would enable you to mill aluminum heads.



Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder Winona van norman 4000 head & block wet surface grinder